RME ADI-2ProFS BK

ADI-2 Pro FS R Black Edition

Convertisseur 2 canaux AD/DA AES / Adat / Analogique 768kHz + preamp casque - 1/2 rack 1u.

Analog Inputs

XLR

Input: XLR, servo-balanced

Input sensitivity switchable +24 dBu, +19 dBu, +13 dBu, +4 dBu @ 0 dBFS

Digital Trim Gain range: 0 dB up to +6 dB

Signal to Noise ratio (SNR) @ +13/19/24 dBu: 120 dB RMS unweighted, 124 dBA

Signal to Noise ratio (SNR) @ +4 dBu: 119 dB RMS unweighted, 123 dBA

Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.5 kHz

Frequency response @ 96 kHz, -0.5 dB: 3 Hz – 45.5 kHz

Frequency response @ 192 kHz, -1 dB: 2 Hz – 92.7 kHz

Frequency response @ 384 kHz, -1 dB: < 1 Hz – 124 kHz

Frequency response @ 768 kHz, -3 dB: < 1 Hz – 180 kHz

THD @ -1 dBFS: -116 dB, 0.00016 %

THD @ -10 dBFS: -125 dB, 0.000056 %

Channel separation: > 110 dB

TRS

As input XLR, but:

Input: 6.3 mm TRS jack, servo-balanced, fully compatible to TS and RCA

Analog Outputs

1/2 XLR

Output level switchable +24 dBu, +19 dBu, +13 dBu, +4 dBu @ 0 dBFS

Signal to Noise ratio (SNR) @ +13/19/24 dBu: 120 dB RMS unweighted, 124 dBA

Signal to Noise ratio (SNR) @ +4 dBu: 117 dB RMS unweighted, 120 dBA

Frequency response @ 44.1 kHz, -0.1 dB: 0 Hz – 20.2 kHz

Frequency response @ 96 kHz, -0.5 dB: 0 Hz – 44.9 kHz

Frequency response @ 192 kHz, -1 dB: 0 Hz – 88 kHz

Frequency response @ 384 kHz, -1 dB: 0 Hz – 115 kHz

Frequency response @ 768 kHz, -3 dB: 0 Hz – 109 kHz

THD @ 0 dBFS: < -120 dB, 0.0001 %

THD+N @ 0 dBFS: -115 dB, 0.00018 %

Channel separation: > 110 dB

Output impedance: 200 Ohm

1/2 TS (rear)

As output XLR, but:

Output: 6.3 mm TS jack, unbalanced

Maximum output level: +19 dBu

Signal to Noise ratio (SNR) @ +19 dBu: 120 dB RMS unweighted, 123 dBA

Signal to Noise ratio (SNR) @ +13 dBu: 118 dB RMS unweighted, 121 dBA

Signal to Noise ratio (SNR) @ +4 dBu: 115 dB RMS unweighted, 118 dBA

Output impedance: 100 Ohm

Phones 1/2

As Output 1/2 TS, but:

Output: 6.3 mm TRS jack, unbalanced, stereo

Output impedance: 0.1 Ohm

Signal to Noise ratio (SNR) @ +22 dBu: 120 dB RMS unweighted, 123 dBA

Signal to Noise ratio (SNR) @ +7 dBu: 118 dB RMS unweighted, 121 dBA

Output level at 0 dBFS, Ref Level +19 dBu, load 100 Ohm or up: +22 dBu (10 V)

Output level at 0 dBFS, Ref Level +4 dBu, load 8 Ohm or up: +7 dBu (1.73 V)

THD @ +18 dBu, 32 Ohm load, 1.2 Watt: -110 dB, 0.0003 %

THD+N @ + 18 dBu, 32 Ohm load: -107 dB, 0.00045 %

THD @ +14 dBu, 16 Ohm load, 0.94 Watt: -110 dB, 0.0003 %

Max power @ 0.001% THD: 1.5 W per channel

Output Phones 3/4

As Output Phones 1/2, but:

Output levels at 0 dBFS: Hi-Power off +7 dBu, Hi-Power On +22 dBu

Balanced Phones mode

As before, but:

Output levels at 0 dBFS: Hi-Power off +13 dBu (3.46 V), Hi-Power On +28 dBu (19.5 V)

Output impedance: 0.2 Ohm

Signal to Noise ratio (SNR) @ +28 dBu: 123 dB RMS unweighted, 126 dBA

Signal to Noise ratio (SNR) @ +13 dBu: 121 dB RMS unweighted, 125 dBA

Output level at 0 dBFS, Hi-Power On, load 150 Ohm or up: +28 dBu (19.5 V)

Output level at 0 dBFS, Hi-Power Off, load 8 Ohm or up: +13 dBu (3.46 V)

Max power @ 0.001% THD: 2.9 W per channel

Digital Inputs

General

Lock Range: 28 kHz – 200 kHz

Jitter suppression: > 50 dB (2.4 kHz)

Accepts Consumer and Professional format

AES/EBU

1 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992

Input sensitivity 1.0 Vpp

SPDIF coaxial

1 x RCA, transformer-balanced, according to IEC 60958

High-sensitivity input stage (< 0.3 Vpp)

AES/EBU compatible (AES3-1992)

SPDIF optical

1 x optical, according to IEC 60958

ADAT compatible

Digital Outputs

AES/EBU

1 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992

Output level 2.7 Vpp

Format Professional according to AES3-1992 Amendment 4

Single Wire mode, sample rate 28 kHz up to 200 kHz

SPDIF coaxial

1 x RCA, according to IEC 60958

Output level 0.75 Vpp

Format Consumer SPDIF according to IEC 60958

Single Wire mode, sample rate 28 kHz up to 200 kHz

SPDIF optical

1 x optical, according to IEC 60958

Format Consumer (SPDIF) according to IEC 60958

Sample rate 28 kHz up to 200 kHz

Digital

Clocks: Internal, AES In, SPDIF In, ADAT In

Jitter suppression of external clocks: > 50 dB (2.4 kHz)

Effective clock jitter influence on AD and DA conversion: near zero

PLL ensures zero dropout, even at more than 100 ns jitter

Additional Digital Bitclock PLL for trouble-free varispeed ADAT operation

Supported sample rates for external clocks: 32 kHz up to 200

Internally supported sample rates: 44.1 kHz up to 768 kHz

General

Included power supply: external switching PSU, 100 - 240 V AC, 2 A, 24 Watts

Standby power consumption: 50 mW

Idle power consumption: 10 Watts, Max. power consumption: 22 Watts

Idle current at 12 V: 850 mA (10 Watts)

Dimensions (WxHxD): 215 x 44 x 130 mm (8.5" x 1.73" x 5.1")

Weight: 1.0 kg ( 2.2 lbs)

Temperature range: +5° up to +50° Celsius (41° F up to 122°F)

Relative humidity: < 75%, non condensing