GML 2032 Préampli micro / EQ avec alim / channel strip

PRODUIT SUR COMMANDE NOUS CONTACTER POUR LES DÉLAIS DE LIVRAISON.

GML2032 Préampli micro à 1 canal avec égaliseur paramétrique à 4 bandes.

Un des préamplis les plus neutre du marché, fabrication sans compromis

Conception 100 % classe A.

Le mix du préampli 8300 et de l’EQ 8200 donne le 2032.

Fiabilité, musicalité, précision et transparence sont la signature du GML 2032.

Entrée instrument, filtre passe-haut à deux positions, fantôme en façade et commutation de phase,

et des options de routage flexibles tout en maintenant la norme de performance GML et

la transparence. Le 2032 avec ses circuits avancés, imaginés par George Massenburg,

a bénéficié de plus de 30 ans de recherche du département d'ingénierie de GML.

SPECIFICATION

INPUT

Microphone: 1 kΩ balanced, >80dB CMRR, +17dBu max input before clipping Insert

In: 20 kΩ balanced bridging, >40dB CMRR, +21dBu max input before clipping

MI: 1 MΩ unbalanced, +8.5dBu maximum input before clipping

THROUGHPUT

Bandwidth:

-0.1dB / +0.002dB, <10Hz to >30kHz, worst-case

-3dB, >300kHz and <<10Hz, typical

<0.003% Harmonic distortion, 20Hz to 20kHz, typical

<0.006% SMPTE Intermodulation distortion, typical

30v/usec discrete low-noise precision operational amplifiers, GML 9202

Noise:

-80dBu broadband, EQ engaged, typical

-112dBu EIN, MI input

-120dBu EIN, Microphone input (Rs = 150Ω, 30kHz BW), worst-case

-80dB crosstalk, 20Hz to 20kHz, worst case

FORM FACTOR

One channel, multi-input, gain, filter, parametric equalizer with insert capability and internal power supply

Inputs: Mic (balanced, XLR), MI (Musical Instrument; unbalanced, 1/4” TS)

Gain control: +15dB to +70dB, 5dB steps

Fine control: -5dB to +5dB, continuously variable

Phase switch, Phantom power (P48) switch

Filter -- Second-order Butterworth active high-pass filter; 100Hz, flat, 40Hz • Insert control: split

parametric equalizer from preamplifier

EQ section: four bands, fully parametric, continuously variable controls

EQ IN switch

Overload (OL) indicator: peak indication, preamplifier and equalizer

OUTPUT

+27.0 dBv clipping

3-wire unbalanced XLR (pin 2 hot)

< 3 mV output offset max, stabilized by D.C. servo correction, direct couple

OTHER

Internal linear power supply, 110V/220V switch, 50/60Hz; +/-28 VDC, +/-18 VDC, +48VDC Approx. power consumption:

28W; 500mA/250V slo-blo fuse installed (110V operation) Separate Ground and Chassis connections at rear

19" W x 1.75" H x 10" D rack mount chassis, black anodized aluminum, silver legend

Weight: 11 lbs., approximate; shipping weight may vary

*GML reserves the right to make changes to these specifications as it deems necessary. Individual unit performance may vary due

to environmental influences, manufacturing variations, and component tolerances. Please refer to full Specifications sheet (included

in the Model 2032 Ownerʼs Manual) for details.